NO HOT WATER? Follow These EASY Tips
NO HOT WATER? Follow These EASY Tips
Blog Article
Just about everyone has his or her own perception in relation to What Would Cause My Electric Water Heater to Stop Working?.
Numerous modern-day homes make use of an electric hot water heater for their heating system, as a result of its convenience and simplicity of use. Nonetheless, just like any other electrical home appliances, troubles may occur with its usage, all of a sudden. It can be actually frustrating to wake up to a chilly shower rather than a warm one or having your bathroom with water that isn't hot enough and even as well warm. Whatever the instance may be, water heater problems can be rather stressful. The good news is, we have actually made a list of possible remedies to your hot water heater issues. There are a number of elements that might trigger much of these troubles, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the issue is, getting it repaired must not present excessive of a problem if you comply with these actions:
Call An Expert:
If after changing all defective parts and resetting your temperature level, the hot water heater still isn't functioning, you might need to contact a specialist plumber for a specialist viewpoint. The issue with your heater could be that the hot and cold faucets have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the situation may be, a professional plumber would help address the trouble.
Examine Your Power Supply:
As fundamental as this may seem, it is very necessary. Without ample power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the concern, merely turn it off and on again. Replace any broken or damaged fuse. Check the home appliance with power after these changes to see if it's now functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot enough, you might require to inspect the temperature setups on your upper thermostat. Ensure the breaker is turned off before doing anything. Open up the accessibility panel as well as press the red button for temperature level reset above the thermostat. This should aid heat up the water. Turn the breaker back on as well as check if the trouble has been fixed.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, after that attempt looking into your burner if it is still functioning. Check each of your heating elements to make sure the issue isn't with any of them. If any of them is defective, replace that part and then examine whether the warm water is back on.
Final thought
Hot water heater issues are not always major. Many of them are due to minor concerns like a blown fuse or damaged burner. Replacing the faulty components need to suffice. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a devoted person who reads about What Would Cause My Electric Water Heater to Stop Working?, I think sharing that piece of content was smart. Enjoyed reading our entry? Please share it. Let someone else locate it. Thank you for your time. Come back soon.
Schedule A Service
Report this page